Corgi Batboat "C107" : 1967 - 1981

1976 seconde version, la remorque

 

Le Batboat est la seconde version caractérisée par un aileron arrière rouge et un logo jaune et noir de la chauve-souris dessus. L’autocollant présent des deux cotés représente une forme géographique en rouge, noir et jaune. Le phare de dessus ne possède plus la cage dorée sur le dessus, la remorque est équipée de roues type « whizzwheels » en plastique au lieu des roues en métal et la fixation du Batboat se fait maintenant à l’aide de deux pions de centrage sur l’axe central de la remorque qui prennent place dans deux trous situés sur l’axe central du Batboat.

 

Batboat 1976-81 Orange fin version, only ever available with blue glass, Batman and Robin, different hull stickers, no beacon cage at all. Box was header box predominantly yellow and black with a window. I own a Batboat box that has the date 1974 on the back (dc comics 1974) which was the first version of the box, and shows you how early Corgi were thinking of changing the design. When they eventually did, they used the boxes that had already been printed off (but changed the date later on). Why they never changed the picture though (because it shows the pic of the prototype) is beyond me.

If you look at the pic of the prototype batboat, you will notice that the tin effect was going to be kept either side of the fin, whilst the fin lost the tin completely.

 

The Batboat, there were 6 versions of this. The tin fin 1st issue, which came with aqua, purple, white and light blue glass and 2 versions of the later one. Early versions of the last issue Batboat still have the cut outs on the body of the boat. If you look at the front of a tin fin and orange fin you will see that the tin fin has 2 slits where you can see into the boat, whereas later orange fin versions don't, apart from VERY VERY early orange fin ones. Its hard to describe or name it really, its the area where the raised area on the front of the boat dips into the front area which leads to the hook on the front.Theres 2 holes there either side. They simply used up the rest of the tin fin bodystyles they had left over.The type of Batboat that appears on the back of 76 issues was a prototype and was never produced for any of you that have ever noticed the differences between the boat you get and the pic on the back. Also, any whizzwheels made from 76 youll notice they tend to have a lot of chrome wear. Earlier models were painted twice and then lacquered whereas in later whizzwheels versions they only had one coat and were not lacquered. This is why some early models, even battered ones tend to keep the chrome finish a lot better, rather than the later issues.

The type of Batboat that appears on the back of 76 issues was a prototype and was never produced, if you look at the back of your orange fin Batboat box, you'll notice that the Batboat pictured still has the same bat-stickers as the tin fin, and it still has a beacon. This was the prototype assembled, and they wanted it cheaper so removed the beacon and changed the design of the stickers. I daresay that prototype is out there somewhere, yet i've never seen it :

 

Deux versions des roues whizzwheels de la remorque :